What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Handi-Foam Black Low Pressure One-Component Polyurethane Foam Sealant (OCF), Aerosol-06/21/2016
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaHandi-Foam Black Low Pressure One-Component Polyurethane Foam Sealant is a moisture cured, multipurpose foam sealant specially formulated black in color. Handi-Foam Black is ideally suited for areas where product appearance could be a factor such as landscaping, pond and waterfall design or vehicle undercarriages.
Purpose of product.
Usage: Pond and water-feature bonding sealant.Structure such as solid, liquid, aerosol etc.
Form: aerosolDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 20242775 Barber Road
Norton OH 44203
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Reacted urethane prepolymer, mixture 000000-71-6 40.0-70.0 No Chlorinated paraffin waxes 063449-39-8 10.0-30.0 Yes 
CoC List
Methylene bisphenyl diisocyanate (MDI) 000101-68-8 5.0-10.0 Yes CoC List
Polymethylene polyphenyl isocyanate 009016-87-9 5.0-10.0 Yes CoC List
Isobutane 000075-28-5 3.0-7.0 Yes CoC List
Dimethyl ether 000115-10-6 3.0-7.0 No Propane 000074-98-6 1.0-5.0 No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :June 21, 2016 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2 3 1 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : 165.0
-
Warnings
Hazard Statements
Danger. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes Skin Irritation. May cause an allergic skin reaction. Causes Serious Eye Irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause harm to breastfed children. May cause damage to organs through prolonged or repeated exposure.
Precautionary Statements
Prevention
Keep Out of Reach of Children. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. No Smoking. Do not spray on an open flame or other ignition source. Pressurized Container: Do not pierce or burn, even after use. Avoid breathing vapors or fumes. Do not get in eyes, on skin, or on clothing. Wash hands and other skin areas exposed to material thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing and eye protection. In case of inadequate ventilation wear respiratory protection
Response
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical attention.
IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice if you feel unwell. If experiencing respiratory symptoms: Call a POISON CENTER or doctor.
Eliminate all ignition sources if safe to do so.
Storage
Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 deg C/122 deg F.
Disposal
Dispose of contents/container in accordance with applicable local/regional/national/international regulations. -
Acute health effects
From SDS:
Emergency Overview
Danger. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes Skin Irritation. May cause an allergic skin reaction. Causes Serious Eye Irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause harm to breastfed children. May cause damage to organs through prolonged or repeated exposure.
Potential Health Effects
Eye Contact: May cause eye irritation.
Skin Contact: May cause skin irritation. Symptoms may include redness, edema, drying, defatting and cracking of the skin. May cause an allergic reaction.
Inhalation: May be harmful if inhaled. May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Ingestion: May be harmful if swallowed. May cause gastrointestinal irritation: stomach distress, nausea, or vomiting. -
Chronic health effects
From SDS:
May cause damage to the lungs, central nervous system and skin. -
Carcinogenicity
MDI and PMDI: IARC Group 3 carcinogen- Not classifiable as to its carcinogenicity to humans. Not listed as a carcinogen by ACGIH, OSHA or NTP. MDI/PMDI did not cause birth defects in laboratory animals; fetal effects occurred only at high doses which were toxic to the mother. Lung tumors have been observed in laboratory animals exposed to respirable aerosol droplets of MDI/PMDI (6mg/m3) for their lifetime. Tumors occurred concurrently with respiratory irritation and lung injury. Current exposure guidelines are expected to protect against these effects.
-
Handling information
Keep away from sources of ignition. No smoking. Do not spray on an open flame or other ignition source. Pressurized container: do not pierce or burn, even after use. Container may explode if heated. Avoid contact with skin and eyes. Do not breathe dust/fume/gas/mist/vapors/spray. Do not swallow. Use only in a well-ventilated area or outdoors. Avoid welding or other “hot work” in the vicinity of exposed cured foam. When using do not eat, drink or smoke. General hygiene advice: Launder contaminated clothing before reuse. Wash hands before eating, drinking or smoking. Store in a dry place. Ideal use temperature is 65 deg F to 80 deg F (18 deg C to 27 deg C). Do not expose aerosol cans to open flame or temperatures above 122 deg F (50 deg C). Excessive heat can cause premature aging of components resulting in a shorter shelf life. Storage below 55 deg F (12.7 deg C) may affect foam quality if chemicals are not warmed to room temperature before using. Protect containers from physical abuse. Keep containers upright. Keep away from children.
-
Disposal information
Before disposing of containers, relieve container of any remaining foam and pressure. Allow dispensed product to fully cure before disposing. Never discard in a liquid state. This material must be disposed of in accordance with all local, regional, national, international regulations. Do not puncture or incinerate containers.
-
California Prop. 65 Warning
This product contains trace amount of substances known to the State of California to cause cancer or other reproductive harm.
-
First Aid
Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes, holding the eyes open with fingers and occasionally lifting the upper and lower lids. Use lukewarm water if possible. If present and easy to do so, remove contact lenses, If irritation persists, get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of soap and water. Foam will stick to skin, gently wipe product from skin with a damp cloth and wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Call a physician if irritation persists.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Obtain medical attention.
Ingestion: If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical advice/attention.
-
UN Global Harmonization Classification
